WE43 Magnesium Alloy

WE43 Magnesium Alloy

WE43 is a rare-earth-containing magnesium alloy known for its combination of low density, mechanical strength, corrosion resistance, and stability at elevated temperatures.

Aikerly supplies WE43 magnesium alloy in selected forms and can evaluate material and processing requirements for custom projects.

Physical Properties

WE43 has a typical density of approximately 1.80–1.83 g/cm³. Its physical properties include relatively low density, useful thermal conductivity, and a coefficient of thermal expansion typical of magnesium alloys.

The specific physical properties may vary depending on alloy condition, product form, processing route, and applicable material specifications.

Mechanical Properties

Typical mechanical properties of WE43 depend on product form, temper, processing condition, and test method.

Representative values may include:

Tensile Strength 290–340 MPa

Yield Strength 150–230 MPa

Elongation 10–15%

Elastic Modulus 44–46 GPa

These values are provided for general engineering reference only. Actual properties should be confirmed according to the applicable specification, product form, condition, and inspection requirements.

Material Processing

WE43 can be supplied or processed in forms such as extruded and forged products, subject to material availability and project requirements.

Common manufacturing processes may include:

Melting and casting

Extrusion

Forging

Heat treatment

Machining

Surface treatment

The appropriate processing route depends on the required product geometry, mechanical properties, dimensional requirements, and production volume.

Heat Treatment

Heat treatment can be used to adjust the microstructure and mechanical properties of WE43.

Different material conditions may provide different combinations of strength, ductility, dimensional stability, and temperature performance.

The applicable heat-treatment condition should be selected according to the required material specification and product requirements.

Corrosion and Temperature Performance

WE43 provides good corrosion resistance and maintains useful mechanical performance over a relatively broad temperature range compared with many conventional magnesium alloys.

Actual performance depends on alloy condition, environment, surface condition, product geometry, and processing history.

For demanding applications, Aikerly can review the required material properties and production conditions on a project-specific basis.

Applications

WE43 may be considered for lightweight engineering components where a combination of low density, mechanical performance, and temperature stability is required.

Potential application areas include:

Lightweight structural components

Automotive components

Industrial equipment

Electronic and equipment housings

Sporting and specialty equipment

Application suitability should be evaluated according to the specific design, operating environment, material requirements, and applicable standards.

Custom Material & Engineering Review

Aikerly can support projects involving:

Material selection

Product-form selection

Processing-route evaluation

Mechanical-property requirements

Dimensional and quality requirements

Manufacturing feasibility

Inspection and documentation requirements

For custom WE43 projects, please provide the required product form, dimensions, specifications, quantity, destination, end-user organization, and intended end use.

Aikerly may request additional information to verify the end user, intended end use, destination, and applicable export-control requirements.

Product Forms

WE43 may be available in selected product forms, including:

Sheets

Plates

Round bars

Other forms subject to project requirements and material availabilityplates, and custom components.