Carbon Fiber Products
both strong and lightweight Carbon fiber composites
Aikerly Carbon-based and Carbon Fiber Products
Unidirectional Carbon Fiber Fabric
Biaxial Fabric
Chopped Cabon Fibre
Milled Carbon Fiber
PLA Carbon Fibre 3D Printer Additive
AikerlyProduct Category
Our Most Popular Cabon Fibre Products
PLA Carbon Fiber 3D Printer Filament
CNT Fiber
Customized Carbon Fibre Products
●Customized magnesium alloy materials with specific properties
●Customized production of parts, components, and mass-produced products
●Customized 3D printing of parts
If the type of material you need is not listed above, please click Contact Us and we find the products from our China factory for you.
AikerlyProduct Specification and Size
1K 3K 6K 12K 24K 45K 60K
Fiber length 1 mm to 25 mm, section diameter 0.4 mm to 1 mm
Density90g/m2～1067g/m2
Width 300mm 600mm 1000mm
50 mesh 100 mesh 200 mesh 300 mesh 400 mesh 500 mesh 600 mesh 700 mesh 800 mesh
Length (m)3-27 Width (m)1-1.25 Thickness (mm)3-15
PLA Carbon Fiber 3D Printer Additive
1.75mm 3.0mm
Density 200g/m2,300g/m2 and 450g/m2 Width 300mm 400mm 500mm Mechanical properties Grade Ⅰ,Ⅱ and Ⅲ
CNT Fiber
~50μm Strength 800~1000MPa 1000~1200MPa 1200~1500MPa
AikerlyDimension and Deviation
Moisture content should be no more than 0.2%, the deviation of combustible content should be less than 0.2%, and the chopping rate should be more than 95%.
PLA Carbon Fiber 3D Printer Additive
Wire diameter ±0.02mm
AikerlyAppearance Quality
Chopped fibers have a uniform appearance, no obvious hairs, no hairballs, no foreign matter, no bonding between fibers, and a round or oval cross-section
Uniform shape, pure surface, no foreign matter, no sticking
Smooth appearance, uniform thickness, continuous fibers, resin-soaked fibers, no foreign impurities
AikerlyProduct Packaging Transportation and Storage
Wrapped on a hard cylinder with an inner diameter of 76mm or 83mm and a length of 192mm or 290mm, each roll of carbon fiber is wrapped with a soft transparent material on the outer surface, packed into a corrugated box, each roll is separated by a hard partition, and stored in a cool and dry place Ventilated warehouse.
Fill it in a polyethylene plastic bag, put it in a packing box, fill it with cushioning material and moisture-proof material, and seal the finished product after attaching a product qualification inspection certificate
During transportation, it should be placed firmly, transported, and stored at room temperature, and avoid sunlight exposure
PLA Carbon Fiber 3D Printer Additive
Vacuum-sealed packaging, moisture-proof and oxidation-proof, storage temperature 0-40°C
Use polyethylene film on one side or both sides, wind it on a hard paper core tube with a diameter of 250-300mm, and then put the prepreg into a pre-plastic bag. Prepregs should be transported refrigerated, not rolled over or placed vertically, and the packaging should not be damaged
Aikerly (Shangai) New Materials Co.， Ltd
Registered Address： Lingang New Area, Shanghai Free Trade Zone
Office Address: No. 122, Lane 998, Baoxiang Road, Jiading District, Shanghai
