Titanium Alloy Products
Lighter and stronger than steel, corrosion resistant and high temperature resistant
Aikerly Titanium and Titanium Alloy Products
Titanium Alloy Plate
Titanium Alloy Rod
Titanium Strip
Titanium Wire
Titanium Tube
Titanium Foils
Aikerly Product Category
Our Most Popular Titanium Alloy Products
（Rod、plate, Sheet, Strip, Foil、Wire、Tube）
Customized Titanium Alloy Products
●Custom titanium alloy materials for specific properties
●Custom parts, components and mass production for products
●3D printing of custom parts
If the type of material you need is not listed above, please click Contact Us and we find the products from our China factory for you.
Aikerly Product Specification and Grades
Sponge Titanium
MHT-100 MHT-110 MHT-125 MHT-140 MHT-160 MHT-200 Level 0-Level5
Titanium and Titanium Alloy Bars
TA1 TA2 TA3 TA4 TA6 TA7 TA15 TA19 TB2 TC1 TC4 TC4ELI
Titanium and Titanium Alloy Plate and Sheets
TA1 TA2 TA3 TA4 TA6 TA7 TA15 TA19 TB2 TC1 TC4 TC4ELI
Titanium and Titanium AlloyTubes
TA1 TA2 TA3
Titanium and Titanium Alloy Wires
TA1 TA2 TA3 TA4 TC3 TC4 TC4ELI
Titanium and Titanium Alloy Strips and foils
TA1 TA2 TA3 TA9 TA10
Titanium and Titanium Alloy Extruded Profiles
Titanium and Titanium Alloy Customized Parts
Aikerly Product Size
Sponge Titanium
0.83～25.4mm,0.83～12.7mm
Titanium and Titanium Alloy Bars
Diameter 7～230mm, hot-worked state, cold-worked state, length 300～6000mm, annealed state,length 300～3000mm annealed state, length 300～3000mm.
Titanium and Titanium Alloy Plates and Sheets
Cold-rolled annealed state, hot-rolled annealed state, cold-rolled solid solution state, cold-rolled plate thickness 0.3～6.0mm, plate width 400～1000mm, plate length 1000～3000mm, hot-rolled plate thickness 4.75～60.0mm, plate width 400～3000mm, board length 1000～4000mm.
Titanium and Titanium AlloyTubes
Cold rolled and annealed tubes diameter Φ(3～110)×wall thickness(0.2～4.5),Welded tubes diameter Φ(16～63)×wall thickness(0.2～4.5) ,Welded and rolled tubes diameterΦ(6～30)×wall thickness(0.2～4.5)
Titanium and Titanium Alloy Wires
Hot working, cold working annealed state, diameter 0.1～7.0mm
Titanium and Titanium Alloy Strips and Foils
Cold-rolled and annealed foil
Thickness (0.01～0.09mm) width (30～300mm) length ≥500mm Strip thickness (0.1～2.0mm) width (50～500mm) length ≥ 500～2000mm
Titanium and Titanium Alloy Extruded
Titanium and Titanium Alloy Customized Parts
Aikerly Dimension and Deviation
Refer to the relevant specifications for the permissible deviation of the chemical composition of titanium and titanium alloy
Sponge Titanium
Particle size: 0.83～25.4mm and 0.83～12.7mm, The particle size is less than 0.83mm, not more than 5%, and the particle size is bigger than 12.7mm or 25.4mm, not more than 5%.
Titanium and Titanium Alloy Bars
Diameter 7～230mm, deviation ±1.0～ ±2.5mm
Titanium and Titanium Alloy plates and Sheets
Plate thickness deviation ±1.0～ ±2.5mm Sheet Width Deviation+10～+20mm Sheet length deviation+15～+25mm
Titanium and Titanium AlloyTubes
Tubes outer diameter deviation±0.15～ ±0.85mm Thickness deviation12.5%
Titanium and Titanium Alloy Wires
Allowable deviation-0.025～0.14mm
Titanium and Titanium Alloy Strips and foils
Thickness deviation ±0.003～ ±0.1mm Width Deviation ±0.5～ ±2.0mm length deviation+10～+15mm
Titanium and Titanium Alloy Extruded Profiles
Titanium and Titanium Alloy Customized Parts
Aikerly Appearance Quality
To achieve better appearance quality, it is important to control several common defects from occurring in titanium alloy production, including:
●Overcorrosion: This defect appears as a pockmark or bump on the surface of the titanium alloy after pickling, and can be caused by factors such as excessively long pickling time or an imbalance between hydrofluoric acid and nitric acid.
●Hanging ash: This refers to the oxide attached to the surface of the titanium alloy after pickling, which can be caused by excessive deposition of hanging ash during pickling or insufficient cleaning after pickling.
●Streak pattern: Streak-like spots can appear on the surface of the titanium alloy due to uneven pickling reaction or leaving scale.
●Insufficient degreasing, insufficient molten salt treatment time, or failure of pickling solution can also lead to defects in the appearance quality of the titanium alloy.
Aikerly Product Packaging Transportation and Storage
When it comes to packaging, marking, transportation, and storage of titanium and titanium alloy plates, tubes, bars, strips, wires, forgings, and castings, the following guidelines are followed:
●The relevant requirements of national standards such as GB/T8180 are strictly adhered to.
●Customization is available to meet specific customer requirements.
Aikerly (Shangai) New Materials Co.， Ltd
Registered Address： Lingang New Area, Shanghai Free Trade Zone
Office Address: No. 122, Lane 998, Baoxiang Road, Jiading District, Shanghai
